The Jarvis Model 425-20 -hydraulically powered hock cutter for sheep.

•The 425-20 is best suited for sheep hock cutting before fleece removal. It is also suitable for beef tail removal and hog hock cutting.
•Specially designed grabber mechanism holds onto hock to prevent dropping until a trigger is released.
•Compact for easy maneuverability; robust for long, trouble-free operation.
•Super fast cutting cycle combined with high cutting force means high performance for the most demanding applications.
•Designed for optimum operator comfort.
•Anti-tie down controls for operator safety.
•Constructed from corrosion resistant materials for optimum hygiene.
•Meets national and international requirements for hygiene and safety.

Model 425-20    
Drive    Hydraulic
Cutting Cycle Time   1.0 sec
Cutting Force 2000 lbf 8.90 kN
Control Handle    
Air/Dual Anti-tie Down 50 psi 3.4 bar
Blade Opening 3.7 in 94 mm
Overall Length 21 in 533 mm
Weight 25 lbs 11.3 kg
Hydraulic Power Unit    
Motor Power 5.0 hp 3728 W
Operating Voltage 460/230 V, 3 phase, 60 Hz
  other voltages and frequencies available
Hose Length 16 ft 5 m
Oil Capacity 20 gal 76 L
Oil Viscosity at 100ºF / 40º C 200 SUS 46 ISO
Overall Dimensions (with heat exchanger) (l x w x h) 34 x 24 x 28 in 864 x 610 x 711
Overall Dimensions (without heat exchanger) (l x w x h) 31.5 x 25.4 x 29.9 in 800 x 645 x 760
Weight 250 lbs 113 kg



33 Anderson Road, Middletown, CT 06457 USA
Phone: 860.347.7271
Fax: 860.347.9905